Product: CXRacing FMIC Kit
Application: 1992-2002 Toyota Supra Turbo (2JZ-GTE)

Product Description:
CX Racing is proud to announce their new FMIC (front-mount intercooler kit) for the 1992-2002 Toyota
Supra Turbo. Designed to replace the restrictive factory side-mount intercooler, the new FMIC from CX Racing
offers improved flow, position and increased surface area to increase performance, substantially reduce charge
temperatures and eliminate heat soak.
Rather than limit flow and potential surface area by side mounting the intercooler, (where it receives
significantly less air flow), the FMIC for the 1992-2002 factory Turbo Supra from CX Racing features an optimum
front-mount position to maximize exposure to (high-speed) ambient airflow. This not only increases overall
cooling at every boost level, but dramatically reduces heat soak.
Extensive dyno testing with the factory side-mount intercooler revealed that the charge temperatures
continued to escalate with each successive run. The factory intercooler was simply not sized or positioned to
keep pace and suffered from excessive heat soak after only 3 consecutive runs. During the 3 back-to-back runs,
the intake air temperature increased by over 40 degrees! By contrast, the new FMIC from CX Racing dramatically
reduced inlet charge temperatures and maintained that level of cooling run after run. The difference in charge
temperature between the stock intercooler and new FMIC from CX Racing after 3 consecutive runs was an nearly
40 degrees! The additional cooling offered by the FMIC from CXRacing improved the power output of the
turbocharged 3.0 2JZ-GTE by as much as 24 hp and 34 lb-ft!

Features:
• Complete Bolt-On FMIC Kit--No cutting, welding or fabricating necessary
• CXRacing BOV Included in the kit
• 160% Increase in Surface Area (over the stock intercooler) to Maximize Charge Cooling
• Optimum Front-Mount Position for Maximum Exposure to (High-Speed) Ambient Airflow
• Show-Quality Polished Aluminum Tubing & Intercooler Core (3-inch in and out)
• High-Quality Aluminum and Stainless Steel Mounting Brackets, T-Bolt Clamps

Performance:
• Improved Power by 24 hp & 34 Lb-ft over Stock Intercooler
• Decrease Charge Temps by over 40 Degrees over Stock Intercooler
• Decrease Heat Soak & Improved Repeatability
• Dramatically Reduce Harmful Detonation and/or Timing Retard (applied by factory ECU)
• Increase Boost by 1 psi

Specifications:
• CXRacing FMIC Core-24x4x12=1,152 sq inches (Compares to stock core with just 448 sq inches)
• 3.0-inch Polished Aluminum Tubing-2.5-inch to throttle body (Beaded ends to maximize sealing)
• High-Strength 3.0-inch Silicone Couplers (Choice of Colors)
• High-Quality Stainless Steel T-bolt Clamps
• Remote Power Steering Cooler & Lines

Learn more about this kit >>>