CXRacing RB20DET/RB25DET Turbo + Intercooler Upgrade Kit For 89-99 Nissan 240SX S13 S14 with RB20DET/RB25DET Motor.
Product Being Sold:
-Manifold + Wastegate + GT35 Turbo Kit + DownPipe + Intercooler kit + Turbo Intake Uses with Factory MAF Sensor + Air Filter
This is CXRacing's Newest Products for Nissan S13 S14 Chassis. All Parts are Developed from Ground Up, Designed and Built Specially for the 240SX with RB20DET/RB25DET Motor Swap. It is One of the Most Complete Kits Available with the Most Competitive Cost. Kit is Bolt on Fit and Easy Install.
We Own Many Popular Motors and Chassis, Products are Fully Tested, with Fitment Guaranteed.
Product Info and Spec:
Manifold:
- Equal Length Runners for Best Performance Gain
- Heavy Duty 11 Gauge Thick Wall Elbows Welded.
- 1.75" OD Stainless Steel Mandrel Bent Tube Runner
Intercooler Kit:
- 31x12x3 Bar and Plate Intercooler
- 2.5" Hot Pipe and 2.75" Cold Pipe
- Comes with BOV, Silicon Hoses, and T-Bolt Clamps
Turbo, Wastegate and Downpipe:
- T3 Flange GT35 Turbo, Supports 450 HP, Fast Spool.
- 3" Vband Downpipe, Connects to Factory Catback Provision.
- 38mm Wastegate 8 PSI, Comes with Dump Turbo.
- Oil Fitting to Convert Factory Turbo to Single Turbo
Notes:
- Off Road or Track Use ONLY, NOT for Street Use.
- For this bigger turbo, need to have fuel system upgraded and re-tuned.
- This kit only works with factory intake manifold, does not works with aftermarket intake manifold.
- This kit comes with the Turbo Intake as shown on picture that uses factory MAF unit (NOT the 4" Elbow Pipe that Requires Standalone Computer).
*Patent Pending Design*
- GT35 Turbo
- Turbo Intake
- Stainless Steel Turbo Manifold
- 3" Turbo Downpipe + V-band Clamp
- Turbo Oil Return Drain Flange
- 38mm Wastegate (8PSI) with Dump Pipe
- Oil Inlet Feed Line
- Intercooler
- Piping Kit with Hoses and Clamps, BOV
- Intake Falnge that fits MAF + Air Filter
Below Are Installation Pictures:
Product Being Sold:
-Manifold + Wastegate + GT35 Turbo Kit + DownPipe + Intercooler kit + Turbo Intake Uses with Factory MAF Sensor + Air Filter
This is CXRacing's Newest Products for Nissan S13 S14 Chassis. All Parts are Developed from Ground Up, Designed and Built Specially for the 240SX with RB20DET/RB25DET Motor Swap. It is One of the Most Complete Kits Available with the Most Competitive Cost. Kit is Bolt on Fit and Easy Install.
We Own Many Popular Motors and Chassis, Products are Fully Tested, with Fitment Guaranteed.
Product Info and Spec:
Manifold:
- Equal Length Runners for Best Performance Gain
- Heavy Duty 11 Gauge Thick Wall Elbows Welded.
- 1.75" OD Stainless Steel Mandrel Bent Tube Runner
Intercooler Kit:
- 31x12x3 Bar and Plate Intercooler
- 2.5" Hot Pipe and 2.75" Cold Pipe
- Comes with BOV, Silicon Hoses, and T-Bolt Clamps
Turbo, Wastegate and Downpipe:
- T3 Flange GT35 Turbo, Supports 450 HP, Fast Spool.
- 3" Vband Downpipe, Connects to Factory Catback Provision.
- 38mm Wastegate 8 PSI, Comes with Dump Turbo.
- Oil Fitting to Convert Factory Turbo to Single Turbo
Notes:
- Off Road or Track Use ONLY, NOT for Street Use.
- For this bigger turbo, need to have fuel system upgraded and re-tuned.
- This kit only works with factory intake manifold, does not works with aftermarket intake manifold.
- This kit comes with the Turbo Intake as shown on picture that uses factory MAF unit (NOT the 4" Elbow Pipe that Requires Standalone Computer).
*Patent Pending Design*
Click Below Picture to See Flowbench Test of the Intercooler:
- GT35 Turbo
- Turbo Intake
- Stainless Steel Turbo Manifold
- 3" Turbo Downpipe + V-band Clamp
- Turbo Oil Return Drain Flange
- 38mm Wastegate (8PSI) with Dump Pipe
- Oil Inlet Feed Line
- Intercooler
- Piping Kit with Hoses and Clamps, BOV
- Intake Falnge that fits MAF + Air Filter
Below Are Installation Pictures:
Single GT35 Turbo Kit + Manifold Downpipe For 240SX S13 S14 RB20 RB25 450HP
- Brand: CXRacing
- Product Code: TRB-KIT-RB25-S13-TOP-GT35-AI-IC
- Availability: Pre-Order ETA May-2024
-
$1,982.72