CXRacing LS1 Engine / T56 Transmission Mounts Kit + T76 Turbo Header Downpipe Kit + Intercooler Piping Kit + Radiator Hard Pipe Kit For 82-92 Chevrolet Camaro with LS1 /LSx Engine Swap

This Is CXRacing's Latest Turbo Kit for Chevrolet Camaro LS1 Swap, Bolt On Fitment, Makes Big Power:

- Bolt On Engine and Transmission Mount, Not Cut.
- Fits Stock LS1 Oil Pan from 98-02 Camaro.
- T76 with 0.81 Exhaust AR Supports 700 HP with Quick Spool.
- T4 Turbo, 60mm Vband Wastegate.
- 3" Stainless Steel Downpipe.
- Big 4" Core Intercooler, with Bolt On Mounting Brackets
- 50MM BOV.
- 3" Aluminum Piping.
- 1.5" Aluminum Hard Pipe Kit, Fits Stock Location Radiator.

Comes with:
Engine and Transmission Mounts + Turbo Headers + Cross Pipe + Turbo + Wastegate + Downpipe + Intercooler and Piping Kit + BOV + Radiator Hard Piping Kit

1. This Kit On This Item Is Part of CXRacing's Complete LS1 Swap Kit, Some Installed Pictures Shown Below Have Other Parts from The Complete Kit, But NOT All Parts Are Included for This Item. We Offer Many Different Combinations, Please Check Our Other Items.

2. Can't Keep A/C, But Can Keep P/S.

3. Need to Work On the Exhaust System to Connect to the Downpipe (Due to Many Exhaust Options, The Downpipe Is NOT Connected to Stock Exhaust).

4. This Kit Is For Turbo Hardware ONLY, You Will Need to Upgrade Engine's Fuel System and Tune the Engine.

5. Installation Guide Is Available on CXRacing's Website

- Chassis: 82-92 Chevrolet Camaro
- Motor: LS1 /LSx
- Transmission: T56 Manual

Product Being Sold:
Engine Mounts + Transmission Mounts + Turbo Headers + Cross Pipe + Turbo + Wastegate + Downpipe + Oil Line Kit + Intercooler + IC Mounting Brackets + Pipings + BOV + Silicon Hoses + Clamps + Radiator Hard Piping Kit

Note: Radiator, Shroud, Fans, and Oil Pan Are NOT Included.

Product Info and Spec:
Headers/Manifold Kit:

- High Flow Mandrel Bent Runners, 1.65"
- 2.5" Cross Pipe
- Supports T4 Turbo
- Supports 60mm Wastegate

T76 Turbo and Wastegate:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Wet Floating Bearings
- Standard T4 Flange
- 76mm Wheel Compressor
- P Trim .81 A/R Turbine
- 3" V-band Hot Side
- 60mm Vband 12 PSI Wastegate
- Comes with Oil Line Kit

Intercooler Kit:
- Core Size 24"X12"X4"
- Overall Size 31"x12"x4"
- 3" Inlet & Outlet
- Mandrel Bent Aluminum Piping Kit
- 3" Mandrel Bent Pipe
- Intercooler Comes with Aluminum Brackets
- 50mm BOV, Silicon Hoses and Clamps
- With 1.5" Radiator Hard Pipe Kit

Engine/Transmission Mounts:
- Heavy Duty 7 Gauge (0.18") Thick Stainless Steel Panel, with Brace Offers Strong Support
- Adjustable Slotted Bolt Holes
- Polyurethane Bushing Mounts
- Motor Mount is Billet Stainless Steel, Excellent Strength

- Off Road or Track Use ONLY, NOT for Street Use.
- Due to The Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.
- Parts Being Sold are The Kit Being Advertised ONLY. Other Parts Shown On Pictures are For Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.

Click Below Picture to See Flowbench Test of the Intercooler:  

- Especially Designed, Made for the Application Stated
- Fully Tested, Simple Easy Installation
- Offers Excellent Performance Gains

- Engine Mounts + Transmission Mounts
- T76 Turbo Charger + 60mm WG + Oil Line kit
- Headers + Cross Pipe+ Downpipe
- Radiator Piping Kit
- Front Mount Intercooler +Brackets + Aluminum Piping Kit
- 50mm Blow Off Valve
- Silicon Hoses and Clamps
- Vband Clamps

Note: Oil Pan, Radiator, Shroud and Fans Are Not included.

Engine Mount and Transmission Mount Installed Pictures:

Header/Manifold, Cross Pipe, Turbo, WG, Downpipe Installed Pictures:

Intercooler and Piping Kit Installed Pictures:


Write a review

Please login or register to review

Turbo Intercooler Engine Transimission Mount Kit For 82-92 Camaro LS1 T56 Swap

  • Brand: CXRacing
  • Product Code: TRB-ESK-KIT-LS-CAMARO8292-IC
  • Availability: In Stock
  • $2,329.00

Available Options