CXRACING Top Mount T04E Turbo Intercooler Kit for 1997-2001 Nissan Frontier with KA24DE Engine

This is CXRACING's NEWLY Released Turbo kit. Developed from Ground Up, Fully Tested.

Application:
- Chassis:1997-2001 Nissan Frontier
- Motor: KA24DE

Product Being Sold:
Matching Manifold + Turbo + Wastegate + Downpipe + Intercooler Kit + Carburetor Adapter

This is NOT an Universal Kit that does not Fit. This kit is Developed and Tested, Fits Perfect. Easy Install. Comes With Oil Line kit and Oil Pan Bolt-on Plug (no Welding).

Aluminum Carburetor Adapter to Connect Intercooler Piping.

Keeps Power Steering and AC. Not Major Cut, only need to Open Holes on the Driver Side Front to Run Piping.

Product Info and Spec:
Intercooler:
- Bar & Plate Aluminum Intercooler
- Core Size: 18"x11"x3"
- Overall Size: 25"x11"x3"
- 3" Core, 2.5" Inlet Outlet One Side

Piping Kit:
- 2.5" Mandrel Bent Aluminum Piping
- Comes with 50mm BOV, Silicon Hoses, and T-Bolt Clamps

Turbo and Wastegate:
- T3 Flange to Manifold
- 5 Bolt Hot Side Downpipe Flange
- .50 A/R Compressor
- .63 A/R Turbine
- 3" Inlet & 2" Outlet
- 1/8 NPT Oil Inlet
- 38mm Wastegate 8 PSI

Manifold:
- 16 Gauge Thick Wall 304 Stainless Steel Manifold, Won't Crack.
- New Manifold Design, Move Turbo Towards to the Front, Top Mount T3 or T4.
- Offers More Room for WG and DP.
- Laser Cut Flange.

Downpipe:
- 3" Downpipe
- has O2 Bung and Flex Pipe

Notes:
- Off Road or Track Use ONLY, NOT for Street Use.
- Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only.

Click Below Picture to See Flowbench Test of the Intercooler:

Highlights:
- Completely Redesigned Manifold, has lots of clearance for Master Break Line.
- Turbo sits lower, forwarded, and Angled, Much better placement with all other parts.
- 304 Stainless Steel Manifold, Equal Length Runner, High Flow Exhaust Design
- Fitment is Fully Tested, Fitment very Well, not hitting other Parts.

Items_Included:
- T04E Turbo
- 38mm Wastegate
- Bar & Plate Intercooler, With Mounting Brackets
- Aluminum Piping Kit with Hoses, Clamps, and BOV
- Stainless Steel Manifold
- Downpipe
- Carburetor Adapter
- Oil Feeding line kit

Below Are Installation Pictures:


 
 
 
 
 
 
 

Write a review

Please login or register to review

Turbo Kit Downpipe Intercooler Manifold For 1997-2001 Nissan FRONTIER KA24DE T3

  • Brand: CXRacing
  • Product Code: TRB-KIT-KA24DE-FRONTIER
  • Availability: In Stock
  • $1,329.00


Available Options


  • Emissions Control Warning:
  • It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

  • All Products by CXRACING are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

  • PROPOSITION 65 WARNING

  • These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.