CXRacing Aluminum Oil Pan + DIY Oil Dipstick Kit + Oil Filter Relocation Kit for LS1/LSx Engine Swap For 1964-1967 Chevrolet Chevelle

Comes with Oil Pan, Oil Pickup, Oil Filter Relocation Sandwich and Oil Lines (Oil Filter Is NOT Included, Fits Filter with M20 Thread)

Chevelle's Steering Bar/Rod/Linkage Travels Long Distance and Hits Factory LS Oil Pan. We Have Designed This Oil Pan Specifically to Fit and Clear the Steering Linkage, See Pictures Below.

Note:
-This Is A Proprietary Design By CXRacing, Works With CXRacing's Engine Mount Kit. If You Use Different Mounts and Have the Engine Sits Too Low, It Will Hit and Don't Fit.
-See Installed Picture, This Oil Pan Is Based On The Engine Position That The Top Of the Intake Manifold Has 5.5" Clearance to the Upper Edge of the Firewall.
-This Oil Pan Is For NA Setup, If You Use It for Turbo Application, You Will Need to Weld Oil Return Bung on The Oil Pan.
-This Kit Is Developed on a Chevelle Chassis, Should Also Fit Many Old Muscle Car A-Body Chassis: Chevelle, Malibu, El Camino, Impala, Bel Air, Camaro, and Nova, But We Have NOT Tested and NOT Guarantee Fitment.
-Compare to Factory Dipstick Tube (not included), Pls See the Product Photo No.9


Application:
-Chassis: 1964-1967 Chevrolet Chevelle
-Motor: GM LS1 /LSx

Product Being Sold:
-Oil Pan + Oil Pickup + Oil Filter Relocation Kit + Oil Dipstick Kit (DIY Kit)
-This is CXRacing's Newest Products for the Application Stated Above. All Parts Are Developed from Ground Up in Our R&D Center in USA, Designed and Built for Improved Performance Gains, with Excellent Fitment and Easy Installation.

Product Info and Spec:
Oil Pan:
-Built-in with Baffles and Trap Doors for High Performance and Race Applications
-1/2" Thick Aluminum CNC Cut Flange
-AN8 Oil Port Fittings for External Oil Filter or Oil Cooler
-AN6 Oil Port for Checking Oil Level
-Holds 6 QT of Oil (5.5 QT for Oil Pan, 1/2 for Remote Oil Filter)

Oil Relocation Kit
-AN8 Oil Lines
-Oil Filter Relo Sandwich (Color Could Be Gold, Blue, Red, Or Silver, NOT Guaranteed, Depends On Inventory)

Dipstick Setup:
-Use AN Fitting and Braided Line.
-Use Factory LS Dipstick (Not Included)

**Note: Dipstick Setup Uses Factory Dipstick (not included). The kit comes with Braided Oil Line and Fitting that Fits Factory Dipstick. It Uses AN6 Fitting to Connect to Oil Pan. See Pictures. You will need to make the line yourself because the length is depend on applications. All you need to do is to cut the braided line to the length you need and connect it with AN fittings.

Notes:
-Off Road or Track Use ONLY, NOT for Street Use.
-Due to the Complexity of Swapping a Motor to Different Chassis, Please Make Sure that You Understand the Application Stated Here are the Right Parts for Your Project.
-Parts Being Sold are the Kit Being Advertised ONLY. Other Parts Shown on Pictures are for Demo Only (of Our Complete Swap Kit). Check Our Other Website Items.


 
 
 
 
Highlights
-Especially Designed, Made for the Application Stated
-Fully Tested, Simple Easy Installation
-Offers Excellent Performance Gains
-One of the Best Kits on the Market, with High Quality Products and Affordable Pricing

Items_Included:
-Oil Pan
-Oil Pickup
-Oil Line
-AN8 Oil Fittings
-Oil Sandwich
-Note: Oil Filter Is NOT Included

Below Are Installation Pictures:


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Write a review

Please login or register to review

Aluminum Oil Pan Sump Filter Relocation Kit for LS1 LS Chevrolet Chevelle

  • Brand: CXRacing
  • Product Code: OP-RELO-LS-CHEVELLE
  • Availability: In Stock
  • $544.54


  • Emission Notes:
  • All Parts and services offered by CXRACING are for competition vehicles only. Use on State and Federal Highways may be a violation of the EPA Clean Air Act. The Clean Air Act can be found at http://www.epa.gov/air/caa/. This document contains in detail what are considered to be violations of the CAA and corresponding penalties for failure to obey and should be read in full before purchasing or installing this competition use only product. Ensuring that all emissions, noise/sound, and speed/use related laws are followed is the responsibility of the Buyer(s). Installation and use of this product indicates that this disclaimer has been read, acknowledged, and understood fully by both the Buyer(s) and Installer(s). The Buyer(s) assumes all associated risk of the purchase.

  • Federal and several state laws prohibit the removal, modification or rendering inoperative of any part that affects emissions or safety on motor vehicles used on public streets or highways. CXRacing assumes no liability for any violations arising out of any federal, state or provincial emissions or safety requirements on motor vehicles arising out of the customer’s modifications and/or use of CXRacing products. It is the responsibility of the customer to determine if their modified vehicle complies with applicable laws.

  • PROPOSITION 65 WARNING

  • These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.