CXRacing Single Turbo + Intercooler Kit For:
1978-1985 Mazda RX-7 SA/FA/FB Series 1, 2, 3 With FC/FD 13B Turbo Motor Swap, Upgrade Single Top Mount Turbo.

Thick Wall Manifold + T70 Turbo + 60mm Wastegate + Downpipe + Turbo Oil Line Kit + Intercooler Kit

Note: Radiator, Oil Cooler, Gilmer Drive Pulley Shown On Installed Pictures Are NOT Included. Check Our Other Website Item If You Want Them.

These Are Brand New Developments By CXRacing, Upgrade Stock 13B Twin Turbo to Single Top Mount Turbo, Dramatically Increase Performance, And Offer Beautiful Professional Looks.

Note:
1. This Is For Single Turbo Upgrade, Does NOT Fit Stock Twin Turbo. Due to Change of Turbo Setup, You Will Need to Re-Tune Your Car.
2. This Kit Is Developed Based On Left-Hand-Drive Chassis, For Right-Hand-Drive Chassis, We Have Not Tested and It Probably Will Hit Steering Shaft.
3. Downpipe Ends with 3" Vband, It Does NOT Fit ANY Exhaust System, You Will Need To Build or Fix The Rest Of the Exhaust System.
4. Need to Drill Two 3.25-3.5" Holes On Both Side of the Radiator Support to Run Intercooler Piping.
5. No Installation Instruction Is Included, This Kit Is For Advanced User Who Knows What to Do.

These Are Brand New Developments By CXRacing, Replace Stock Parts With Larger and Better Upgraded Products, Dramatically Increase Performance, And Offer Beautiful Professional Looks.

Application:
- Chassis: 1978-1985 Mazda RX-7 SA/FB
- Engine: 13B Turbo Motor From FC Or FD (With Original 12A Front Cover)

Product Info and Spec:
Turbo Kit:
- 11 Gauge Thick Wall Manifold
- T4 Flange, 60mm Vband Wastegate Flange
- T70 Turbo with 0.96 AR Exhaust Housing, Good For 500 HP
- 60mm Vband Wastegate
- 3" Stainless Downpipe, It Ends Close To Transmission End, You Will Need to Finish the Rest of the Exhaust System
- Oil Line and Fitting Kit

Intercooler:
- 25x11.75x3 inch Overall Size
- 3" Inlet and outlet
- Intercooler Piping Kit:
- 3" Aluminum Pipes with Hoses
- 50mm BOV

Notes:
- Off Road Or Track Use ONLY, NOT For Street Use
- Due To The Complexity Of Swapping A Motor To Different Chassis, Please Make Sure That You Understand The Application Stated Here Are The Right Parts For Your Project.
- Parts Being Sold Are The Kit Being Advertised ONLY. Other Parts Shown On Pictures Are For Demo Only (Of Our Complete Swap Kit). Check Our Other Website Items.

　

Click Below Picture to See Flowbench Test of the Intercooler:  　

Highlights:
- Especially Designed, Made For The Application Stated
- Fully Tested, Simple Easy Installation
- Offers Excellent Performance Gains

Items_Included:
- Turbo Manifold and Downpipe
- T70 Turbo with 0.96 Exhaust AR
- 60mm Vband Wastegate
- Intercooler with Mounting Brackets
- 3" Aluminum Piping Kit with Hoses and BOV

Need to Drill Two 3.25-3.5" Holes On Both Side of the Radiator Support to Run Intercooler Piping.