CXRacing Turbo Kit For 1995-2004 Toyota Tacoma 3.4L V6 5VZ-FE Motor

Supports 450 HP
Application:
- Chassis: 1995-2004 Toyota Tacoma 3.4L V6
- Motor: 5VZ-FE

Product Being Sold:
Turbo Kit + Intercooler kit + DownPipe

This is CXRacing's Newest Products for Tacoma 5VZ. All Parts are Developed from Ground Up, Designed and Built Specially for the 5VZ-FE Motor. It is One of the Most Complete Kits Available with the Most Competitive Cost. Kit is Bolt on Fit and Easy Install.

We Own Many Popular Motors and Chassis, Products are Fully Tested, with Fitment Guaranteed.

This Manifold is for 5VZ-FE Converting NA to Turbo.

This Product was developed based on US model Left-Hand-Drive chassis. For Right-Hand-Drive, due to potential conflict with steering shaft, fitment most likely will be an issue and we don't guarantee fitment. Modification is needed and we won,t accept return due to Right-Hand-Drive fitment issues.

Product Info and Spec:
Manifold:
- CNC Cut Flange.
- 2.5" Cross Pipe, Vband.
- T4/T4 Turbo and 38mm Wastegate Flanges.
- Bolt On Fitment for Big Turbo like GT35 and T70.
- Fits Perfectly, no Cut

DownPipe:
- Fits 3" Vband Turbo Exhaust Housing.
- 3" Stainless Steel Pipe.
- Comes Both Factory O2 and Aftermarket O2 Sensor Flange, Easier for Tuning.

GT35 Turbo and Wastegate:
- 4" Air Inlet
- 2.5" Compressed Air Outlet
- Standard T4 Turbine Housing Flange
- 3" Vband Exhaust Outlet
- Journal Bearing
- 300~500 WHP
- Oil and Water Cooled
- 6-25 PSI Working Pressure
- .70 A/R Compressor
- .68 A/R Turbine
- 61.3 /82 mm Compressor Wheel
- 62 /67.8 mm Turbine Wheel
- 38mm 8 psi Wastegate

Intercooler Kit:
- Bar and Plate Core Size: 22"X11"X3"
- 2.5" Inlet and Outlet
- 2.5" and 2.75" Piping kit with Silicon Hoses and BOV

Notes:
- For installation, if it is AWD, needs to drop front axel to remove oil pan (for installing turbo oil return drain plug, and install cross pipe).
- Need to Upgrade and Tune The Fuel System for This Turbo Upgrade.

Optional Dual Ball Bearing Turbo is Available with Extra Payment, Please Select the Ball Bearing Option When Buying.

Highlights:
- High Quality CNC Cut Flange
- 304 Stainless Steel
- Beautifully Made Craftsman Works

Items_Included:
- T4 GT35 Turbo
- Stainless Steel Turbo Manifold and Cross Pipe
- 38mm Wastegate (8PSI) with dump tube
- 3" Turbo Downpipe
- Turbo Oil Kit
- Intercooler with Mounting Brackets
- Piping Kit with Hoses and Clamps, BOV
- Vband Clamps x4 (2.5" x2 + 3" x2)

Below Are Installation Pictures:


 
 
 
 
 
 
 
 
 
 
 

Write a review

Please login or register to review

Turbo Kit intercooler Manifold Downpipe for 95-04 Tacoma 5VZFE 5VZ-FE 5VZ

  • Brand: CXRacing
  • Product Code: TRB-KIT-5VZFE-IC-KIT
  • Availability: Pre-Order ETA Apr-2024
  • $2,157.76


Available Options


  • Emissions Control Warning:
  • It is illegal to sell, install, or offer for sale any aftermarket part that alters or modifies the original design or performance of the motor vehicle pollution control system. Product(s) listed here is(are) solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for use on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

  • All Products by CXRACING are solely for Competition Vehicles(race vehicles) that are for Off-Road, Track Racing ONLY. All parts are for used on a vehicle that will NEVER be used, or licensed, or registered for use upon a street and highway. DO NOT Purchase the part(s) if you are intending to use it(them) on a Street/Highway vehicle(s).

  • PROPOSITION 65 WARNING

  • These products may contain chemicals known to the State of California to cause birth defects or other reproductive harm. For more information visit www.P65Warnings.ca.gov.